https://ldartools.com/wp-content/uploads/2022/02/Screen-Shot-2022-02-01-at-2.28.40-PM.png 551 740 Kevin Moses https://ldartools.com/wp-content/uploads/2019/12/LDARtools_logo-300x55.jpg Kevin Moses2022-02-01 14:56:462022-02-01 14:56:46Broken Probe Tip Filter Removal Tech Tip
Breaking off the base of a probe tip phx42 filter can be frustrating but with the right removal procedure, you can quickly be back to work.
- Carefully use the tip of the pliers(LDAR #4217) to grab the outside of the plastic.
- Push the ends of the pliers firmly into place.
- Spin the plastic counterclockwise to screw it out of the filter base.
Important: Make sure not to touch the center tapered post. If this portion gets scratched or marred, it will need to be replaced.
For a printable version of this procedure, click here.