Spanbox5 FID Automatic Calibration Updates

The Importance of Volatile Organic Compound Leak Detection

A new version of Cal5 has been released. Below is a list of the changes.

  • Updated the head unit and base not connected warning text.
  • Improvements to head unit and base communications.
  • Changed Power Down to Sleep Mode after drifts.
  • Can now submit SpanBox hardware issues directly from Cal5.0.
  • Security improvements.

If your SpanBox is currently running version 5.0.404.1 or higher, please follow
the instructions below to update the SpanBox online.

  1. Tap Update Cal5.
  2. Tap Update Online.
  3. The SpanBox will restart upon completion. You can verify the update by confirming the correct version number in the bottom-right portion of the Home screen.

If your SpanBox is currently running an earlier version than 5.0.404.1, please follow the instructions below to update the SpanBox via USB.

  1. Download the install files from the following link: https://ldartools.sharefile.com/d-sf043998d70e645d582275b5472a8c6ea
  2. Extract the files from the downloaded Files.zip folder.
  3. Copy and paste the files to the SpanBox’s USB drive.
  4. Insert the USB drive into the SpanBox.
  5. Tap Menu.
  6. Tap Update Cal5.
  7. Tap Update from USB.
  8. The SpanBox will restart upon completion. You can verify the update by confirming the correct version number in the bottom-right portion of the Home screen.

If you experience any issues during the update process, please contact support@ldartools.com for assistance in updating.

/by